Is it possible to remove embroidery

It protects your shirt from any damages. The goal is removal, not to ruin a perfectly good article of clothing. Begin to use your tweezers now, to pull the threads out from the embroidery. If you experience any resistance whatsoever, make sure to stop right then and there. If that happens, ensure that your threads are all properly torn by the seam ripper. And there you have it! An easy way to remove embroidery done by a sewing machine!

Often times, bags that people use on a daily basis are made from nylon. Commonly, nylon bags have some type of embroidery on them. First, you have to pick a starting point to begin tearing the stitches away on the inside of the bag. Personally, I suggest going after a point in a corner or along one of the edges of whatever lettering or logo is on the bag. Hold your bag so that the embroidery is easily accessible. This will make it easy to determine where you want to start and how you want to go about choosing which logo or letter you want to remove first.

Make sure that at this point, you have your seam ripper ready to go. Begin by sliding your seam ripper underneath the thread of the embroidery. Push forward with enough pressure to push the cutting edge accurately behind the sharp pointed fork of your ripper against the threads to ensure a solid and clean cut through the stitches.

Each thread will be located next to one another, this makes things pretty simple, which is nice! To remove these stitches, take your tweezers and pull the already cut threads through the material to remove them. Continuously pull these cut threads through the back of the embroidery on your nylon bag, until the desired amount of thread and embroidery is removed. First, you want to make sure those tools that I specified are being used.

They really do make all the difference. Can you imagine trying to cut such small threats with a pair of scissors? Especially if you happen to have poor vision. This honestly makes things a lot easier by giving full open access to the threads that you need to cut in order to get a nice clean removal.

Another thing to be aware of is the fact that there can be layers upon layers of stitches. This can make things difficult as dealing with such small detail in such high volume can be tedious, to say the least. Make sure you pay attention to which thread goes first.

You usually want to start in a corner or somewhere that allows your seam ripper to almost be guided, allowing you to get a much cleaner cut. You also want to always remember where you began, forgetting could seriously throw you off track and you may end up completely out of luck. No one wants to accidentally ruin their own project! One slip up could cost you your project. You may also end up breaking the skin on the tip of your seam ripper. One you can be proud of. If you pull the thread with extra force than is necessary, even inadvertently, it might leave holes.

In fact, there may already be holes and when you pull on the embroidery thread you will manage to make the holes bigger. Whatever tool you use, use it from the back of the garment , whenever possible.

This way no damage is visible on the front of the garment. When thread is wet, it is weak. So, dampen the embroidery thread. Use the tools without too much pressure. If you are using a blade and you are exerting pressure the least it would do is unsightly puckering on the surface. Stop the work, when you meet the stabilizer that will become visible as you remove the embroidery. Beyond that is just fabric. You may also want to keep the area with the embroidery taunt as you work. Use an embroidery hoop or a round surface or even your finger to keep the work tight and projected.

You need the threads to be visible as you work. If you are thinking of removing embroidery of course you are, why else are you reading this practice your skills on a garment you do not mind losing. Do not use that good shirt to practice your cutting skills. If you do not have time, keep the job for some other time. This is a work that needs a lot of patience and some time. I have had to remove embroidered letters from a plush toy. Is there anyway of brining the pile back or at least to make it not so obvious that it as been unpicked.

The process of unpicking as explained by you works well thank you. Hi Lesley You can try steaming the plush toy with a fabric steamer — this will soften the fibers and then gently comb the pile over the bald areas I suppose you have them. Thank you, I was able to remove the embroidery from a Pottery Barn kids flannel nightgown for my granddaughter. Your email address will not be published.

How to remove embroidery properly This is how I removed the embroidery from a very inexpensive cap I bought on a hiking trip. A seam ripper is useless if not sharp for any job First I turned the hat to the back of it. Use a tweezer with pointed ends to remove the thread that is stubborn and stuck and any stabilizer stuck at the back or front Remove the whole thread lint stuck on the garment. Work one layer at the time and remove the stitches very slowly. If you feel any resistance — slow down even more.

Go back to another side of the fabric and see what caused the interference. Once you have eliminated all of the stitches, pick up the left-behind threads with a lint brush or duct tape. Another way to remove machine embroidery is with disposable or safety razor. On the opposite side of your embroidery, you will see fine bobbin threads.

Just run over these stitches with your razor gently several times. Just go slowly and carefully in any case. Using stitch remover is the fastest way to remove embroidery. Yes, those come at a higher cost than your traditional seam ripper. The one that has the best reputation of all is Peggy stitch eraser. The only way to find out if the harm is imminent is to cut the embroidery threads of the monogram.

If you can remove embroidery threads while other shirt threads are still intact, press the area with iron and see how it looks.

So maybe the effort is not worth the risk. Taking embroidery out of a tight weaved and delicate fabrics like polyester is a bit like tattoo removal. Scarring will be visible no matter how careful you are with the process. So, maybe it makes sense to look for an alternative solution? Maybe sew on a patch over the existing embroidery. The reason is foundational stitches that are added to embroidery under the design commercial designs add thousands of those stitches!